MB - Large Through Hole Power Chuck Fixtures
With built-in type cylinder, it is ideal for machining applications on working table.
- Rust-proof for Pneumatic Cylinder：Inside wall of cylinder being rustproof treated ;cyclinder can work under wet or high moisture circumstances without rusty or serized trouble.
- Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents work-chip and coolant water form entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
- Benefit of Built-in Cylinder: The cylinder is connected to chunk itself directly for obtaining better stability, less space, and higher machining efficiency.
Specifications
Unit: mm
| Spec> Model | A | B | C | D | E | F | G | H | I | J | K | L | M | O | P | |
| MB-06 | 228 | 173 | 45 | 16 | 118 | 158 | 40 | 73 | 20 | 12 | 31 | 18 | 4-Ø11 (PCDØ202) | M10 x 1.5P | 3-M8 x 1.25P (PCDØ134) | |
| MB-08 | 270 | 215 | 52 | 17 | 130 | 172.5 | 42 | 95 | 25 | 14 | 35 | 18 | 4-Ø11 (PCDØ243) | M10 x 1.5P | 3-M10 x 1.5P (PCDØ150) | |
| MB-10 | 315 | 256 | 75 | 19 | 146 | 190.5 | 46 | 110 | 30 | 16 | 40 | 18 | 4-Ø13 (PCDØ285) | M12 x 1.75P | 3-M12 x 1.75P (PCDØ182) | |
| Spec> Model | Q | Piston Area cm2 | Plunger Stroke mm | Jaw Stroke Diameter | Max Gripping Force kgf | Max Gripping Force (KN) | Max Hydr Pressure kgf/cm2 | Gripping Range | Gripping Force At Air Pressure 7kgf/cm2 (0.7Mpa) kgf | Gripping Force At Air Pressure 7kgf/cm2 (0.7Mpa) (KN) |
| MB-06 | -- | 97 | 12 | 5.5 | 5040 | -49.4 | 20 (2.0) | Ø20~Ø173 | 2000 | -19.6 |
| MB-08 | 3-M10×1.5P (PCDØ186) | 156 | 16 | 7.4 | 8100 | -79.4 | 20 (2.0) | Ø25~Ø215 | 3300 | -32.3 |
| MB-10 | 3-M12×1.75P (PCDØ232) | 226 | 19 | 8.8 | 12330 | -120.9 | 21 (2.1) | Ø37~Ø256 | 4800 | -47 |
