Cap Tolerance Measuring Machine

The MD 500 measurement system from NUMTEC checks mechanically machined wheels for the correct cap tolerance prior to finishing. With a cycle time of only 8 seconds every wheel can be verified, and wheels that are out of tolerance or within a limited range are ejected to a separate roller table for further analysis.


  • Compatible with wheels from 14” to 22” in diameter and up to 45 kg.

  • Cycle time of 8 seconds, including feed in and feed out.

  • Fully laser-based measurement.

  • No sample testing; every wheel will be measured and checked.


NUMTEC MD 500 wheel measurement system.

Back To Wheel Testing Equipment